1. Prepare program files

-Ensure that the program file format is correct (usually G-code or specific machine format)

-Check that the program file naming conforms to the standard (no special characters, moderate length)

2. Connect devices

-Connect the computer to the cutting machine via USB, network, or storage device

-Ensure stable connection

3. Upload operation

-Select "Upload Program" or similar options on the control software interface

-Browse and select the program file to upload

-Confirm the upload parameter settings (such as coordinate system, tool compensation, etc.)

-Click the 'Upload' or 'Send' button

ATC nesting CNC router loading program steps

1. Access program list

-Enter the program management interface on the machine control panel or software

-View the list of stored programs

2. Choose a program

-Select the program to run from the list

-Preview the program content to confirm if it is correct

3. Loading program

-Click the 'Load' or 'Select' button

-The system loads the program into the running buffer

-Confirm that the program information is displayed correctly

ATC nesting CNC router removal program steps

1. Enter program management

-Navigate to the program storage management interface

-Ensure to have deletion permission (if permission is set)

2. Select the target for deletion

-Select the program to be deleted from the program list

-Multiple batch deletion options are available (depending on system functionality)

3. Perform deletion

-Click the delete or remove button

-Confirm the deletion operation (the system may require a second confirmation)

-Waiting for deletion completion prompt

ATC nesting CNC router execution program steps

1. Preparation work

-Ensure that the materials are properly clamped

-Confirm that the tool installation is correct and the parameter settings match

-Check that safety protection devices are in place

2. Program verification

-Execute empty run or simulation (optional)

-Check the starting point and safe height of the program

3. Start the program

-Press the start or loop start button

-Closely observe the initial operation situation

-Place your hand near the emergency stop button to prepare for the emergency

4. Monitor operation

-Observe whether the processing is normal

-Pay attention to abnormal sounds or vibrations

-Pause or stop the program as necessary

Precautions for operating ATC nesting CNC router

1. It is necessary to back up important programs before operation

2. Ensure that the program matches the current machine configuration

3. Confirm that the workpiece coordinate system is set correctly before execution

4. It is recommended to run the new program at low speed or in sections for the first time

5. Keep the operating environment clean and avoid interference

There may be slight operational differences between different brands and models of ATC nesting CNC routers, which can be referred to in the specific equipment operation manual.

More professional knowledge Contact Us:

Jinan M-shine Technology Co., Ltd.

Top ATC CNC Router Manufacturer

- Woodworking Engraving Machine

- Woodworking CNC

- Rotating Saw Blade Woodworking Machine

WhatsApp/WeChat: +8618766144006

Email: info@m-shine.com

Official Website: www.m-shinetech.com#m-shinecnc#multihead #atccncrouter #cncrouter #woodcncrouter #drillingbank #sawbalde #woodcutting #rotatesaw #cncmachine #woodrouter #atcmachine